| Application | |
| Application | hygienic systems | |
| Media | viscous media and liquids with suspended | particles; | liquids and | gases | |
| Medium temperature | [°C] | | | -25...125; (145 max. 1h) | |
| Pressure rating | | 30 bar | 3000 kPa | 435 psi | |
| Min. bursting pressure | | 100 bar | 10000 kPa | 1450 psi | |
| Type of pressure | | | relative pressure | | |
| No dead space | | | yes | |
| Electrical data | |
| Min. insulation resistance [MΩ] | 100; (500 V DC) | |
| Protection class | III | |
Reverse polarity protection yes
Integrated watchdog yes | |
| 2-wire | |
| Operating voltage | [V] | | 20...32 DC | |
| Current consumption | [mA] | | 3.6...21 | |
| Power-on delay time | [s] | | 1 | |
| ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PI2715-00 — 08.09.2016 | |
| |
| PI2715 | |
| Combined pressure sensor | |
| PI-006-REA01-MFRKG/US/ /P | |
| 3-wire | |
| Operating voltage [V] | 18...32 DC | | |
| Current consumption | [mA] | | < 45 | | |
| Power-on delay time [s] | | 0.5 | |
| Inputs / outputs | |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 | |
| Outputs | |
| Total number of outputs | 2 | | |
| Output signal | switching signal; analogue signal; IO-Link; (configurable) | |
| Electrical design | | PNP/NPN | | |
| Number of digital outputs | | 2 | | |
| Output function | normally open / normally closed; (parameterisable) | |
| Number of analogue outputs | | 1 | |
| Analogue current output [mA] | | 4...20, invertible; (scalable) | |
| Short-circuit protection | | yes | |
Type of short-circuit
protection | | pulsed | |
| Overload protection | | yes | |
| 2-wire | |
| Max. load [Ω] | 300 | | |
| 3-wire | |
Max. voltage drop switching
output DC | [V] | | 2 | | |
Permanent current rating of
switching output DC | [mA] | | 250 | |
| Switching frequency DC | [Hz] | | 125 | |
| Max. load | [Ω] | | (Ub - 10 V) / 20 mA | |
| Measuring/setting range | |
| Measuring range | | -1...6 bar | -100...600 kPa | -14.5...87 psi | |
| Set point SP | | -0.99...6 bar | -99...600 kPa | -14.4...87 psi | |
| Reset point rP | | -1...5.99 bar | -100...599 kPa | -14.5...86.9 psi | |
| Analogue start point | | -1...4.5 bar | -100...450 kPa | -14.5...65.3 psi | |
| Analogue endpoint | | 0.5...6 bar | 50...600 kPa | 7.3...87 psi | |
| Insteps of | | 0.005 bar | 0.5 kPa | 0.1 psi | |
| | | | SP1 = 1.5 bar | rP1 = 1.38 bar | |
| Factory setting | | | SP2 = 4.5 bar | rP2 = 4.380 bar | |
| | | | ASP = 0.0 bar | AEP = 6.0 bar | |
| Accuracy / deviations | |
Switch point accuracy
[% of the span] | | < ± 0,2; (Turn down 1:1) | |
| Repeatability | [% of the span] | | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) | |
| Characteristics deviation | | | < ± 0,2; (Turn down 1:1 linearity, incl. hysteresis
and repeatability limit value setting to DIN 16086) | |
| | [% of the span] | | | |
| Linearity deviation | | | | < ± 0,15; (Turn down 1:1) | | |
| | [% of the span] | | | | | |
| Hysteresis deviation | | | | < ± 0,15; (Turn down 1:1) | |
| ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PI2715-00 — 08.09.2016 | |
| |
| PI2715 | |
| Combined pressure sensor | |
| PI-006-REA01-MFRKG/US/ /P | |
| [% of the span] | | |
Long-term stability
[% of the span] | | < ± 0,1; (Turn down 1:1; per year) | |
Temperature coefficient zero
point
[% of the span / 10 K] | | < ± 0,05; (0...70 °C) | |
| Temperature coefficient span | | | < ± 0,15; (0...70 °C) | | |
| | [% of the span / 10 K] | | | | |
| Response times | |
Damping for the switching
output dAP | [s] | | 0...30 | |
Damping for the analogue
output dAA | [s] | | 0.01...99.99 | |
| 2-wire | |
| Step response time analogue | [ms] | | 45 | | |
| output | | | |
| 3-wire | |
| Min. response time of | [ms] | | 3 | | |
| switching output (dAP) | | | |
| Step response time analogue | [ms] | | 7 | | |
| output | | | |
| Interfaces | |
| Communication interface | IO-Link | | |
| Transmission type | COM2 (38,4 kBaud) | |
| IO-Link revision | 1.0 | | |
| IO-Link device ID | 728 d / 00 02 d8 h | |
| Profiles | no profile | | |
| SIO mode | | yes | |
| Required master port type | | A | |
| Process data analogue | | 1 | |
| Process data binary | | 2 | |
| Min. process cycle time [ms] | | 2.3 | |
| Operating conditions | |
| Ambient temperature [°C] | -25...80 | | |
Storage temperature [°C] -40...100
Protection IP 67; IP 68; IP 69K | |
| Tests / approvals | |
| | EN 61000-4-2 ESD | 4 kV CD / 8 kV AD | |
| | EN 61000-4-3 HF radiated | 10 V/m | |
| EMC | EN 61000-4-4 Burst | 2 kV | |
| | EN 61000-4-5 Surge | 0,5/1 kV | |
| | EN 61000-4-6 HF conducted | 10 V | |
| Shock resistance | | DIN IEC 68-2-27 | 50 g (11 ms) | |
| Vibration resistance | | DIN IEC 68-2-6 | 20 g (10...2000 Hz) | |
| MTTF [years] | | 154 | |
| ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PI2715-00 — 08.09.2016 | |
| |
| PI2715 | |
| Combined pressure sensor | |
| PI-006-REA01-MFRKG/US/ /P | |
| Mechanical data | |
| Weight | [g] | | 358.5 | | |
| Materials | | stainless steel (1.4404 / 316L); FKM; PTFE; PBT; PEI; PFA | |
| Materials (wetted parts) | | ceramics (99.9 % Al2O3); PTFE; stainless steel
(1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4 | |
| Min. pressure cycles | | 100 million | |
| Process connection | | threaded connection G 1 external thread Aseptoflex Vario | |
| Displays / operating elements | |
| Display | | Display unit | LED, green | |
| | switching status | LED, yellow | |
| | function display | alphanumeric display, 4-digit | |
| | measured values | alphanumeric display, 4-digit | |
| Display unit | | bar; kPa; psi; % of the span | |
| Remarks | |
| Pack quantity | 1 pcs. | | |
| Electrical connection | |
| Connector: 1 x M12; Contacts: gold-plated | |
